Sensor WS-DLXac

WS-DLXac measures process signals and transmits data to the base station. Sensing is done using available sensor/equipment that has 0- 500 mV RMS output. A practical example is the relatively low cost current clamp for measuring electric current and based on that estimated energy consumption, signaling whether equipment is on/off/full load/part load etc.

WS-Fast-Tx

The Fast-Tx is a functional enhancement of the WiSensys sensors. It makes use of the memory which is available in the sensors and facilitates the user in using this memory feature.

Sensor WS-DLXm

WS-DLXm measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0 – 1 V DC output.

SensorGraph, WiSensys PC application

SensorGraph is the WiSensys® PC software that is used during installation and operation of the system.

WebSensys, WiSensys web interface

WebSensys is the web interface for WiSensys using the look & feel from SensorGraph. WebSensys can be used to access sensor measurements via the Internet. WebSensys supports all WiSensys sensors.

Sensor WS-DLTi

WS-DLTi measures temperature and transmits data to the base station. Sensing is done using an internal digital sensor.

Sensor WS-DLTa-p100

WS-DLTa-p100 measures temperature and transmits data to the base station. Sensing is done using a Pt100 sensor.

Sensor WS-DLTa-p1000

WS-DLTa-p1000 measures temperature and transmits data to the base station. Sensing is done using a Pt1000 sensor.

Sensor WS-DLTh

WS-DLTh measures thermocouple signals and transmits data to the base station. Sensing is done using any available thermocouple sensor of the J, K or S type.

Sensor WS-DLTc

WS-DLTc measures humidity and temperature and transmits data to the base station. Sensing is done using an internal digital sensor.

Sensor WS-DLC

WS-DLC measures CO2, humidity and temperature and transmits data to the base station. Sensing is done using internal digital sensors.

Sensor WS-DLRs

WS-DLRs measures electrical energy consumption and transmits data to the base station. Sensing is done on any device plugged into the power outlet of the sensor.

Sensor WS-DLRc

WS-DLRc measures electrical energy consumption and transmits data to the base station. Sensing is done on any device connected to the power outlet of the sensor.

Sensor WS-DLXp

WS-DLXp is used for measuring electrical energy consumption in high voltage, high current, 3 phase electrical systems. The WS-DLXp is used in combination with a kWh-meter which can generate pulses.

Sensor WS-DLXv

WS-DLXv measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-30V DC output.

Sensor WS-DLXv-extp

WS-DLXv-extp measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-30V DC output. WS-DLXv-extp is the externally powered version of the wireless sensor WS-DLXv. The sensor is built in an industrial housing.

Sensor WS-DLXv-switch

WS-DLXv-switch measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0 – 30 V DC output. WS-DLXv-switch is the externally powered version of the WS-DLXv and has the possibility to switch the power to the external sensor on or off. The sensor is built in an industrial housing.

Sensor WS-DLXs

WS-DLXs measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-4V DC output.

Sensor WS-DLXs-extp

WS-DLXs-extp measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-4V DC output. WS-DLXs-extp is the extenally powered version of the wireless sensor WS-DLXs. The sensor is built in an industrial housing.

Sensor WS-DLXs-switch

WS-DLXs-switch measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0 – 4 V DC output. WS-DLXs-switch is the externally powered version of the WS-DLXs and has the possibility to switch the power to the external sensor on or off. The sensor is built in an industrial housing.

Sensor WS-DLXa

WS-DLXa measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0- 25 mA output.

Sensor WS-DLXa-extp

WS-DLXa-extp measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-25 mA output. WS-DLXa-extp is the industrial version of the wireless sensor WS-DLXa. The sensor is built in an industrial housing.

Sensor WS-DLXa-switch

WS-DLXa-switch measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-25 mA output. WS-DLXa-switch is the externally powered version of the WS-DLXa and has the possibility to switch the power to the external sensor on or off. The sensor is built in an industrial housing.

Pulse Counter WS-DLXt

WS-DLXt detects pulses, counts the number of pulses and transmits this cumulative value to the base station.

Contact Indicator WS-DLXc

WS-DLXc detects switch contact closures and transmits data to the base station.

Contact Indicator WS-DLXc-extp

WS-DLXc detects switch contact closures and transmits data to the base station. WS-DLXc-extp is the industrial version of the wireless sensor WS-DLXc. The WS-DLXx-extp is extenally powered.

Base Station WS-BU-rs232

WS-BU-rs232 is the base station that receives the data from all WiSensys® sensors. The received data is forwarded to the WiSensys® PC software through the RS232 interface.

Base Station WS-BU-rs485

WS-BU-rs485 is the base station that receives the data from all WiSensys® sensors. The received data is either stored in the base station’s optional non-volatile memory or is forwarded to a connected datalogger via MODBUS protocol, or to SensorGraph via RS232.

Base Station WS-BU-ana

WS-BU-ana is the base station that receives the data from all WiSensys® sensors. The received data is forwarded to e.g. a connected PLC system through a maximum of 4 analog output ports. Also the base can be connected to a PC running SensorGraph via RS232.

Base Station WS-BU-gprs

WS-BU-gprs is the base station that receives the data from all WiSensys® sensors. The received data is forwarded to an internet database through GPRS communication. The default internet application and database is WebSensys. Also the base can be connected to a PC running SensorGraph via RS232.

Base Station WS-BU-ethernet-01

WS-BU-ethernet is the base station that receives data from all WiSensys® sensors. The received data is forwarded to a PC running SensorGraph through Ethernet (TCP/IP)communication or via RS232.

This base stations is for use with SensorGraph

Base Station WS-BU-ethernet-03

WS-BU-ethernet-03 is the base station that receives data from all WiSensys® sensors. The received data is forwarded to an internet database through Ethernet (TCP/IP)communication. Also the base can be connected to a PC running SensorGraph via RS232.

The default internet application and database is WebSensys.

WS-Acc-Ant-Ext Outdoor antenna

High performance omni-directional antenna for increased coverage.