Base Station WS-BU-rs232

WS-BU-rs232 is the base station that receives the data from all WiSensys® sensors. The received data is forwarded to the WiSensys® PC software through the RS232 interface.

Base Station WS-BU-rs485

WS-BU-rs485 is the base station that receives the data from all WiSensys® sensors. The received data is either stored in the base station’s optional non-volatile memory or is forwarded to a connected datalogger via MODBUS protocol, or to SensorGraph via RS232.

Base Station WS-BU-gprs

WS-BU-gprs is the base station that receives the data from all WiSensys® sensors. The received data is forwarded to an internet database through GPRS communication. The default internet application and database is WebSensys. Also the base can be connected to a PC running SensorGraph via RS232.

Base Station WS-BU-ana

WS-BU-ana is the base station that receives the data from all WiSensys® sensors. The received data is forwarded to e.g. a connected PLC system through a maximum of 4 analog output ports. Also the base can be connected to a PC running SensorGraph via RS232.

Base Station WS-BU-ethernet-03

WS-BU-ethernet-03 is the base station that receives data from all WiSensys® sensors. The received data is forwarded to an internet database through Ethernet (TCP/IP)communication. Also the base can be connected to a PC running SensorGraph via RS232.

The default internet application and database is WebSensys.

Base Station WS-BU-ethernet-01

WS-BU-ethernet is the base station that receives data from all WiSensys® sensors. The received data is forwarded to a PC running SensorGraph through Ethernet (TCP/IP)communication or via RS232.

This base stations is for use with SensorGraph