Sensor WS-DLXac

WS-DLXac measures process signals and transmits data to the base station. Sensing is done using available sensor/equipment that has 0- 500 mV RMS output. A practical example is the relatively low cost current clamp for measuring electric current and based on that estimated energy consumption, signaling whether equipment is on/off/full load/part load etc.

Sensor WS-DLXm

WS-DLXm measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0 – 1 V DC output.

Sensor WS-DLXv

WS-DLXv measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-30V DC output.

Sensor WS-DLXv-extp

WS-DLXv-extp measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-30V DC output. WS-DLXv-extp is the externally powered version of the wireless sensor WS-DLXv. The sensor is built in an industrial housing.

Sensor WS-DLXv-switch

WS-DLXv-switch measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0 – 30 V DC output. WS-DLXv-switch is the externally powered version of the WS-DLXv and has the possibility to switch the power to the external sensor on or off. The sensor is built in an industrial housing.

Sensor WS-DLXs

WS-DLXs measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-4V DC output.

Sensor WS-DLXs-extp

WS-DLXs-extp measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-4V DC output. WS-DLXs-extp is the extenally powered version of the wireless sensor WS-DLXs. The sensor is built in an industrial housing.

Sensor WS-DLXs-switch

WS-DLXs-switch measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0 – 4 V DC output. WS-DLXs-switch is the externally powered version of the WS-DLXs and has the possibility to switch the power to the external sensor on or off. The sensor is built in an industrial housing.

Sensor WS-DLXa

WS-DLXa measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0- 25 mA output.

Sensor WS-DLXa-extp

WS-DLXa-extp measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-25 mA output. WS-DLXa-extp is the industrial version of the wireless sensor WS-DLXa. The sensor is built in an industrial housing.

Sensor WS-DLXa-switch

WS-DLXa-switch measures process signals and transmits data to the base station. Sensing is done using any available sensor that has 0-25 mA output. WS-DLXa-switch is the externally powered version of the WS-DLXa and has the possibility to switch the power to the external sensor on or off. The sensor is built in an industrial housing.